![](/images/new-backgrounds/1073770/73770101x1.webp)
Dishwasher installation
These fully integrated dishwashers are specially designed for installation under a continuous countertop.
A cabinet matching panel must be cus- tom made for installation on the front of the dishwasher.
To ensure stability, these dish- washers should only be installed under a continuous countertop which is securely fastened to the cabinet base units.
Dimensions: |
1)For dishwasher height of 890 mm.
2)For dishwasher height of 840 mm.
Total height
1. Levelling the countertop.
Check that the countertop is sufficiently level in both directions. If not, it should be levelled.
2.For countertops with overhang.
Countertop should be the same thick- ness at the front and back to provide proper contact with the top surface of the dishwasher. For countertops with overhang at the front, two pieces of wood or a plate should be attached from the underside as shown below. If two pieces of wood are used, the space between them may be filled with rubber sponge, glued to the counter- top, for better sound insulation
51