Dishwasher installation
Adjusting legs.
Adjust the rear legs until the top cor- ner of dishwasher (above the ad- justed leg) presses against the countertop. Do not overstress the countertop; slide skid provides 10:1 gear ratio!
To raise the machine - turn clockwise.
To lower - turn counter clockwise.
10 turns of slide skid screw produce
1 mm lift. A
Adjust the front leveling legs by pushing on the foot using flat screw- driver.
It is easier to adjust the screw feet if the weight of the dishwasher is not bearing down on them.
If possible tip the machine slightly.
For fine adjustments it may be necessary to press against the cogs of the feet with a screwdriver.
Screw the feet out until the dishwasher is right up against the underside of the countertop, to which it will be screwed later. Ensure that the dishwasher stands level and that the front of the wash chamber is square to the door.
Make sure the machine presses the countertop in all 4 corners.
54
