![](/images/new-backgrounds/1073770/7377059x1.webp)
Operating the dishwasher
Turning on.
Open the door.
Open the water valve (if it is closed).
Press the “I” (ON) touch pad (20). The “ON” indicator lamp will light.
Starting a programme.
Press the touch pad for the desired programme.The indicator lamp for that touch pad will light.
If so desired, select “Top Solo” (2) before starting the programme. (see the “Additional features” sec- tion).
Close the door. The machine will start.
Note:
When required, the water softener reactivation process is performed before the wash programme. It may last several minutes. During this process the “8 k” indicator lamp will be on.
The hardness of the water supply will dictate how often (after how many washes) the water softener needs to be reactivated. For example with a water hardness of 380 ppm (mg/l), reactiva- tion will take place after every 3 pro- grammes. With a water hardness of
140 ppm (mg/l), reactivation will only occur after 8 programmes.
Do not cancel the programme pre- maturely, as important programme steps such as preparing the water softener may be left out.
End of Programme.
A buzzer will sound at the end of the wash programme.
This buzzer is then repeated for one hour at ten minute intervals.
You can turn this buzzer off, if so desired (see “Additional features”).
30