Dishwasher installation
Installing the slides. | Pushing in the machine. |
Two slides are included and should be installed on the feet of the dishwasher before the machine is pushed under the countertop. They will allow the ma- chine to slide easier, protect the floor, and allow adjustment of the rear level- ing legs from the front of the machine.
Adjust the height manually before in- stalling the dishwasher. Leave a space of approx. 5 mm (3/16") below the countertop to allow the dish- washer to be pushed back easily into the recess. Make sure the dish- washer stands level.
Place the slides, with the ratchet at the rear, onto the dishwasher legs.
If the legs of the machine extend more than 2.5 cm (1") attach a piece of wood under each slide skid for sta- bility.
Push the machine into the opening, making sure the electrical cable and hoses can reach their connection points without being kinked. Excess hose should not be pushed behind the dishwasher, but laid to the side.
VERY IMPORTANT!
Kinked hoses will cause the ma- chine to malfunction.
53
