![](/images/new-backgrounds/1073770/7377027x1.webp)
Water Softener
To check the programmed water hardness:
Open the door.
Turn off the dishwasher.
Press and hold buttons b and d while simultaneously turning on the dishwasher. The “ON” indicator lamp will light and the “8 k” and c lamps will flash.
If any other indicator lamps flash, turn off the dishwasher and start again.
Depending upon what “Additional Fea- tures” are currently programmed into your machine, other indicator lamps may also illuminate. These should be ig- nored for the time being.
Press Touch pad c to check the water softener setting currrenty stored.
If a water hardness between 20 and 220 ppm (mg/l) is stored, the indica- tor lamp next to the corresponding touch pad will illuminate (see the Pro- gramming Table). If no lamp lights up, a hardness level greater than
220 ppm (mg/l) was set. In this case:
Press the 2 button. The indicator lamp that corresponds to the stored hardness level will illuminate.
Turn off the dishwasher.
14