Handy Programmer (HP911A)

Same

Tim fjnctic"R are r t d with jsing ine
HP9'
.'
.A
.

Pr

gran

Storage Module (RM11

)

Multi-drop Adapter

( U111)

The HP911A is a hand-held graphic programmer
. ӝts
portability makes it ideal for maintenance use at remote
locations
. The HP911 A has all the features of a ful! size
programming terminal
. (2 m cable for T1 is included}
•
~
Ladder logic programming of T-Series programmable
controllers Ti /T1 S, T2fT2EfT2N and T3,
•
~
Built-in EEPROM allows program copy between
T-Series
controllers-
•
~
Two display modes,
-
Normal
: 5 lines and 12 columns
-
Zoom, Full
device description
•
~
Data monitor for 110 and internal registers
.
•
~
On-line programming & EEPROM write
. (T1S)
a
On-line data set & 110 force-
-
Backlit LCD display for better operation in dim
light
.
The RM102 is an external memory device, which n
store a Tӝ /T1 S program
. By using the HM102,
prrgrarn
transfer from a master Ti/Ti S can be easily done without
the need
for a computer or hand held programmer
. Two-
button operation makes program load ing/savirg
accessible to anyone
.
However, if a
password is used in
the Ti
/T1
S, the password
in the RM102 must match
before a program load
is executed,
The
U111 is an RS-23201RS-4 85 converter dedicati
:J
to
the T1 Series
.
By using the
U111, yip to 32 T1 fT t Ss
can be connected to a master computer
or
higher level
controller via an RS-485 link
. The master computer can
run a S ADA, MM! or DDE Server program_ The T-PDS
Programming software can also be used through the RS-
485 link to program or monitor each individual Ti Ti S
.
(T1 version 1
.20 or later is required for connecting the
T-PDS programming software)
1
3