Toshiba T1S manual Expansion Unit

Flexible ӝ/O

The Ti Series consist of four models, Ti-16, T1-28, T1-40 and T -1-40S. All four are block style controllers allowing for- ӝ/O to be econvrnicaily matched to specific requirements .

The T1-18 and T1-28 are fixed 1/0 non-expandable controllers . The T1-40 and T1-40 110, however, can be expanded_ The 1/0 can be expandable three ways :

.100110P Car S:-

Toshiba used i#s advanced surface nn aunt technology to develop an extremely compact ӝ/O option card, The ӝ/O option cards are approximately 112 the size of a credit card . The T1-40/T1-40 can hold two ӝ/O option cards inserted in the end of the controller. The following option cards are currently available_

• 16 points DC input

• 16 points C output

• 8 DO in/8 DO out combo

• 1 channel Analog output

• 1 channel Analog output

• Field network TO LӝNE-F10 remote

Expansion Rack

The T1-40/T1-408 can be connected to a twolfour slot expansion rack allowing it to utilize most T Series 110 modules.

• 16 points DC input		S/Tӝ40•-16 points DC output
The following UO modules are available for Tӝ-
• 32	points DC input	• 32 points DC output
• 64	points DC input	• 64 points D output
• 15 points AC input		• 12 points AC output
• 8 points relay output		• 12 points relay output
* 4	channels analog input	• 2 channels analog output
1	channel pulse input	• 1 axis position control

• Communication interface

. Expansion Unit

A block type expansion unit is also available .

Each expansion unit has 32 110 points (16 inputs and 16 outputs) . The 71-40/Ti -40 can be connected to either one expansion rack or one expansion unit

. v'" LL1 •	ZTLZ4
_csTTff.l		''r.
.yriru .	RCf .

{sue*v fi~c r'

3