Toshiba T1S manual Series Compatible, High-Performance Software, Built-in Computer ӝnterface

Tӝ/TӝS Common Features

T-Series Compatible

The HP911A Hardy Programmer and the T-PD (T-Series Program Development System) software program the entire family of T-Series programmable controllers- Programs written for the T1ӝT1 S are upward compatible to other T-Series controllers-

S

-tp

i

High-Performance Software

The T1 offers 17 bask ladder irrstnuctions and 76 insertable function instructions . The T1	offers 21
basic ladder instructions and 99 insertable function instructions .
Subroutines. ӝnterrupt functions, ӝndirect addressing, For/Next loops, ӝncrement/Decrement, Pre-
derivative real PӝD, etc. are standard on the T1/T1 S . These functions allow the T1,T1S to	be applied to
the most demanding control applications .

High-Speed Processing

Sophisticated machine control applications require high speed data manipulation . The T1/TiS is designed to meet these requirements . High-speed data processing is the T1/u1 's key feature .

• 1-4 ps per Contact		•	2 .3	ps per Coil	+	4	.2 NS per Transfer
∎ 6	.5 ps per Addition	•	8 .8	ps per Multiplication	+	5	.0 us per Commparison
The	T1 fT1 S also supports the immediate interrupt function (1				input types only)- This allows inputs to

be recognized and outputs tumed ON/OFF independent of the program scan .

Built-in Computer ӝnterface

The T11T1 S's RS-232C programmer port can accept computer read/write commands . This results in easy connection to higher level computers, operator interface units, etc . By using the multi-drop adapter {CU111), up to 32 T1fT1Ss can be connected to a master computer- The T1fT1S has the same communications protocol as other members in the T- Series family .

&ӝ
Operator ӝnterface	A+Eastr`r C:on1pL,ter	Remote programmlngfrnoiltoring via
	LS	modem (radlo/phone) is possible_
		(Ver 1-20 or later for standard T1's)
ӝ	ӝ	ӝi km max-)
	RS-485
		ӝ Max. 32 T1s