Menu Tree
This menu tree reflects version 2.01 of the embedded printer software. Refer to the Release Notes for more recent versions. Options shown in italics are dynamically hidden depending on the printer mode.
Calibrate Printer Auto Calibrations
AutoBidi Calibration
AutoH2H Calibration
AutoJet Calibration Full AutoSet
Manual Calibrations
Media Feed
Manual Bidi Registration Manual X Head Registration Manual Jet Mapping
Print
Service Calibrations
Head Height Calibration
Media Thickness Sensor Calibration Service Station Calibration
AutoTune
AutoSet Summary
Log Head Registration Data Log Jet Data
Configure for Profile Creation
Printer Settings
Platen Vacuum Control
Printing Delay
Gutter Settings
Top Gutters
Side Gutters
Margin Settings
Space Between Prints
Right and Left Margin
Leading Margin
Trailing Margin
Print Position
Print White Space
Head Height Off Media
Media Out Sensor
Measure Media Type
Quality Check
Sleep Wait Time
Expert/Novice Messages
Localization
Units of Measure
Time Format
Date Format
Vacuum Pressure Units Language/Delete Language (if installed)
Automatic Eject
Low Ink Warning UV Lamps Idle Time Printer Name Restore All Defaults
Tools
Turn UV Lamps On
Turn UV Lamps Off
System Information Maintenance
Access Printheads Perform An Air Purge Print Recover Jets Pattern Print
Print Media Skew Lines
Reset UV Lamp Hours Clean Grit Rollers Printhead Procedures
Load Ink In All Heads Fill Heads with Ink Empty Heads (Fill with Air)
User Diagnostics Printhead Jet Statistics VideoNet Status VideoNet Connection Carriage Motion Calibration
Vacuum Pressure Warnings and Actions List Error History
Log Error History Print Menus Service Printer
Warnings & Actions (Dynamically Hidden)
Menu Tree |