Print Jet-Out Lines
Default Registration Data
•Press No to clear the soft bad jets only.
•Press Yes to clear both the hard and soft jets. The control panel displays this message:
All reported bad jets have been cleared.
25.Press ! (Proceed).
When you have finished mapping jets, the following sum- mary appears on the control panel:
xsoft jets currently reported bad.
xhard jets currently reported bad. x new soft bad jets reported. x new hard bad jets reported.
xprevious soft bad jets cleared.
xprevious hard bad jets cleared.
where x is the number of jets.
This option prints a version of the Prime Bars in which missing jets that are replaced are marked with a black square.
This option resets all registration data. Since there is no registra- tion data after running this option, all calibration values must be reestablished by running the calibrations.
Manual Calibrations |
