HP H45000, H35000 manual Required electrical circuit

•Print width — 0.25 inch (6.35 mm) right and left margin on flexible media. Edge-to-edge printing available on rigid media.

•UV energy source — Dual high-energy, user-replaceable UV bulbs. User selectable low, medium and high settings.

•Agency compliance

•Safety: CE, UL, c-UL

•Emissions: FCC-A, CE

•Immunity: CE

•Connection to RIP — 25-foot (7.6 m) VideoNet cable (included). Maximum length: 100 m.

•Operating conditions — 68° to 85° F (20° to 30° C); 20% to 80% relative humidity, non-condensing

•Storage conditions — -30° to 120° F (-34° to 49° C) ; 10% to 80% relative humdity, non-condensing

•Vacuum and pressure systems — maintains negative rela- tive pressure at the printheads and provides air pressure for purging. Nominal relative vacuum: 5.0 inches H2O. Since rel- ative pressure is maintained, the printer can be operated at various altitudes above or below sea level without adjust- ments to the system.

Electrical Power Power used: 200-240VAC, 50/60 Hz, 16 Amps maximum

Required electrical circuit:

•220 VAC, 20 Amps, with NEMA L6-20R locking wall recepta- cle (North America and Japan), OR

•220 VAC, 16 Amps, single phase, with IEC 60309 wall receptacle (Europe)

NEMA L6-20R	IEC 60309
locking wall receptacle	wall receptacle
(North America/Japan)	(Europe)

Specifications A-3