AutoJet
AutoJet detects individual inkjets that are misfiring or not firing at all. During subsequent printing, the printer compensates for these jets by using other jets in their place, ensuring maximum print quality without reducing print speed.
You can also identify and map missing jets manually from the Manual Calibrations menu (see “Manual Jet Mapping” on page
Jet replacement is not available in Billboard mode.
To run AutoJet:
•Select AutoJet Calibration from the Auto Calibrations menu (see “Auto Calibrations” on page
•Run AutoJet automatically with the AutoTune scheduler (see “AutoTune” on page
Tip | AutoJet does not work with transparent media, nor |
| with many translucent media. In this case, run Man- |
| ual Jet Mapping, or map jets on opaque media |
| before loading transparent/translucent media for |
| printing. |
|
|
1.Press the Calibrate key from the Front Page screen, then press Auto Calibrations > AutoJet Calibration in the menu.
2.The printer prints the AutoJet test pattern.
3.The printer reads the AutoJet test pattern and maps any missing jets to available working jets.
The control panel shows the progress of this operation as the percentage completed.
4.The printer prints an AutoJet report.
AutoJet |
