•Report individual hard bad jets — enables you to report a “hard” bad jet, which will not be checked or reen- abled by AutoJet.
•View current bad jets — lists the bad jets on a given printhead.
•Clear individual bad jets — enables you to clear (mark as good) a jet.
•Clear all bad jets for a head — clears (marks as good) all jets on a selected head currently marked as unusable.
•Clear all bad jets — clears (marks as good) all jets on all heads currently marked as unusable.
Select an option and follow the corresponding procedure below.
Report Individual Bad Jets
When you select Report Individual Bad Jets, the control panel displays the following prompt:
Head 1:
Press Proceed to report a bad jet.
4.Press , and ) to select a head number, then press ! (Proceed).
The control panel displays a numeric keyboard that you can use to enter the number of the bad jet.
5.Enter the jet number, then press the Enter key.
6.When you are finished entering jet numbers, press the Esc key.
The control panel displays the head selection message again.
7.Press , and ) to select the next head number, then press ! (Proceed).
8.Repeat steps 5 through 7 for each head containing bad jets you want to report.
9.When you are finished reporting bad jets, press (. The control panel displays the previous menu.
Manual Calibrations |