GE Monogram ZISW42D ZKHT1 Trim Kit For 3/4 Panels, Support for Custom Handles, Door Handle

ZKHT1 Trim Kit (For 3/4" Panels)

Support for Custom Handles

Option 1 Installation

Step 3 Assemble panel, extrusion

and handle

•Remove the door extrusions and door panels.

•Drill 1/16" pilot hole through extrusion.

•Drill clearance holes through the panel and extrusion.

•Assemble the door panel, extrusions and custom handle.

•Install screw(s) long enough to pass through the extrusion, door panel and into the handle.

3/4" Min.

1-1/2" Max.

Screw

Step 4

Mount assembled panels

•Place assembled panel onto bottom trim with support bracket tabs inserted into slots.

•Push the panel back against the steel door with door extrusion flush to the handle side of the door.

•Open door fully to stop.

• Install screws at the top, hinge side and end of door	Door Handle
extrusion.

ZKHT1 INSTALLATION

35