GE Monogram ZIS42N, ZISB42D, ZISW42D ZKT42 Trim Kit, 3/4 Custom Panels, INSTALLATION ZKT42

ZKT42 Trim Kit

3/4" Custom Panels

Option 1 Installation

Step 5

Adjust

grille panel

height

The refrigerator is shipped with the top case trim secured at the 83" refrigerator height.

•Loosen 2 screws on both sides and raise the top case trim to meet soffit height, from 83" to 84-1/2".

•Tighten all 4 screws.

Screws

Top Case Trim

Raise To

Installation

Height

Step 6 Secure 3/4" panel to grille panel support

INSTALLATION

ZKT42

Important: Maintain 1-1/2" min. gap between top of doors and bottom of grille panel.

•Secure the new grille panel support to the back side of the 3/4" panel with #6 screws.

•Be sure the lip on the support panel is over the top of the wood panel.

Panel Support

Overlaps Top

Step 7

Install1/16"

grille panel

Back View

Grille Panel Support

•Install four of the six larger under cut screws such that the top of the screws are 1/16" from the surface of the support.

•Attach the assembled panel to the grille frame by inserting the four protruding screws into brackets located on each side of the grille frame.

30