GE Monogram ZISW42D ZKT42 Trim Kit, 3/4 Custom Panels, Push the panel back against the steel door

ZKT42 Trim Kit

3/4" Custom Panels

Step 4

Install

panels

ZKT42 INSTALLATION

•Install the lower panel by slipping tabs into the slots on the underside of the dispenser trim.

•Hold in position while fitting new bottom trim against the bottom of the door. Tabs should protrude through the bottom trim.

•Install screws up through the bottom trim using stubby Phillips screwdriver.

•Open door and install screws through the back side of the trim and into the panel at the hinge side.

•Place the upper panel onto the top of the dispenser with tabs inserted into the slots.

•Push the panel back against the steel door.

•Open door and install screws through the back of the trim and into the panel, at the top and hinge side.

Step 5

Install

handles

•Install door handle using original screws.

•Re-install top endcaps, if present.

•Install panel on fresh food door using the same procedure as in Option 1.

•Install grille panel using the same procedure as in Option 1.

32