GE Monogram ZIS42N, ZISB42D ZKHT1 Trim Kit For 3/4 Panels, Support for Custom Handles, Parts List

ZKHT1 Trim Kit (For 3/4" Panels)

Support for Custom Handles

Tools and materials required:

•#2 Phillips screwdriver •Stubby Phillips screwdriver •Drill and appropriate bits •Custom panels •Custom handles •Safety glasses

Note: This kit must be used in conjunction with ZKT42 trim kit for 3/4" panel trim.

These instructions are divided into 2 options: Option 1—For non-dispenser and dispenser models

using custom collar trim.

Option 2—For dispenser model using the standard full-width trim.

Kit contents

Parts List:

A. Fresh food door extrusion

B.Freezer door extrusion for non-dispenser model and dispenser model using custom collar. (Option 1)

C.Freezer door extrusion

for dispenser model using full-width trim. (Option 2)

D.Freezer door handle bracket for dispenser model using full-width trim. (Option 2)

This kit provides the necessary framework to install custom handles of your choice, on 3/4" thick decorator door panels. (Handles not included.) The door extrusions and bracket allow custom handles to be secured to the door structure, rather than the door panels. This kit contains all the necessary parts for dispenser and non-dispenser models. Follow the

instructions in Option 1 when applying custom handles to a non-dispenser model or dispenser model using custom collar trim. Follow the instructions in Option 2 for a dispenser model using the standard full-width dispenser trim.

ZKHT1 INSTALLATION

OPTION 1

For non-dispenser model

or dispenser model using custom collar trim

Before you begin

Note: Optimal final appearance
depends on careful routing	1-13/16"				1-13/16"
depth. Do not exceed 1⁄4"			1/4" Max.		Back Side
		Back Side
routing depth.
		Handle Side		Handle Side
		Freezer Panel			Fresh Food Panel
3/4" custom door panels must be routed to accommodate	Refer to installation instructions for ZKT42 trim kit for
these door extrusions. Rout the panels as illustrated, a	3/4" custom panels Option 1.
maximum of 1/4" deep, and 1-13⁄16" wide, top to bottom	• Follow Step No. 1 to remove the standard aluminum
on the handle side.	trim.
	• Follow Step No. 2 and 3 to attach new 3/4" trim
	pieces and install panel support brackets.

33