GE Monogram ZISB42D ZKT42 Trim Kit, 3/4 Custom Panels, and bottom using original screws, Step

OPTION 1

For non-dispenser model

or dispenser model using custom collar trim

Step 1

Remove

handles & trim

ZKT42 Trim Kit

3/4" Custom Panels

•Open door to 90°.

•Remove the Phillips head screws from the full-length

handles.

• Open the doors fully to stop.

• Remove the screws from the aluminum trim, top, bottom and hinge side.

• Retain screws. Discard original trim.

Note: If a custom collar is to	Important: When the bottom
be used, order ZWCD1 trim kit.	trim piece is removed, an
If a custom handle is to be used,	aluminum shim secured to the
order ZKHT1 trim kit.	bottom of the door can be seen.
	Do not attempt to remove this
	piece.

Step 2	• Attach the new 3/4" trim pieces on the top, hinge side
Install	and bottom using original screws.
3/4" trim

INSTALLATION

ZKT42

42" Models

28