GE Monogram ZIS42N, ZISB42D, ZISW42D ZKT42 Trim Kit, 3/4 Custom Panels, Parts List, Kit contents

ZKT42 Trim Kit

3/4" Custom Panels

Tools and materials required:

•#2 Phillips screwdriver •Stubby Phillips screwdriver •Drill and appropriate bits •Safety glasses •Custom panels

These instructions are divided into 2 options: Option 1—For non-dispenser and dispenser models

using custom collar trim.

Option 2—For dispenser model using the standard full-width trim.

Kit contents

Parts List:

Freezer Door

A.Top trim

B.Side trim

C.Bottom trim

Fresh Food Door

D.Top trim

E.Side trim

F.Bottom trim

G.Panel support brackets (4)

H.4-3/8" screws for support brackets (20)

I.Grille support panel and screws ZKT42–6 screws

J.Wood screws #6 1/2" flat-head screws ZKT42–30 screws

A
B
C
D
E
F
G
H	J	INSTALLATION	ZKT42
	I

This kit provides for the installation of 3/4" custom door and grille panels, using the standard full length handle. This kit contains all the necessary parts to apply 3/4" panels on dispenser and non-dispenser models. Follow the instructions for Option 1 when applying custom panels to a non-dispenser model or dispenser model using custom collar trim. Follow instructions in Option 2 for a dispenser model using the standard full-width dispenser trim.

Note: If you are using custom handles, see ZKHT1 Installation Instructions. For tubular stainless steel handles, see ZKHTSS1 Installation Instructions.

27