Canon PowerShot G2 Shooting Letting the Camera Select Settings, Auto Mode, Monitor if it is on

Shooting - Letting the Camera Select Settings

Auto Mode

In this mode, all you have to do is press the shutter button and let the camera do everything else.

1 Turn the mode dial to		.
2 Aim the camera at the subject.
	Operate the zoom lever to achieve the
3 desired composition (relative subject
	size in the viewfinder).
4	Press the shutter button halfway (p. 36).
	• Two beeps will sound when the camera has
	finished metering and the indicator beside the
	viewfinder will shine green or orange. If the LCD
	monitor is on, the AF frame will appear green.
	• The shutter speed and aperture settings are
	automatically determined and show in the
	display panel. They also appear on the LCD
	monitor if it is on.
	• The yellow indicator will flash and the beep will
	sound one time if the subject is difficult to
	focus upon. The AF frame will also appear
	yellow.
AF Frame	Press the shutter button all the way
5
	(p. 36).

• You will hear the sound of the shutter when the shutter activates.

• The picture will appear for 2 seconds in the LCD monitor if it is open.

Shooting - Letting the Camera Select Settings 41