Canon PowerShot G2 manual Press the button after the last shot

• Minor discrepancies in the overlap can be corrected with the software.

• An image can be retaken. Press the or arrow of the omni selector to return to that frame.

5 Use the same procedures to shoot the remaining frames.

• A maximum of 26 images can be recorded either horizontally or vertically.

• The exposure and white balance settings are set and locked with the first image.

3

4 Compose and shoot the second image so that it overlaps the first.

Shoot the first image.

2 Select the shooting sequence with the

or arrow of the omni selector and

press the button.

• You can also press the shutter button directly

to shoot instead of pressing the button.

Sequence

Sequence

6 Press the button after the last shot.

•The digital zoom, flash (red-eye reduction auto, auto, red-eye reduction), continuous, AEB, AE lock, FE lock, AF frame, light metering, file format (RAW), and image adjustment (ISO speed, contrast, sharpness, and saturation) settings cannot be adjusted in this mode.

•A TV cannot be used as the monitor for shooting in this mode.

•The zoom, flash (on / off), resolution, exposure, white balance* and flash exposure compensation settings can only be adjusted for the first image. The selected settings are applied to the subsequent images and cannot be changed.

*A custom white balance setting cannot be set inmode. To use a custom white balance setting, first set it in another shooting mode.

•If you close the LCD monitor while shooting, it will close the Stitch Assist mode session at that point. If you open the LCD monitor again, and attempt to shoot in Stitch Assist mode, it will start a new sequence beginning with image number 1.

Shooting - Letting the Camera Select Settings 51