Canon PowerShot G2 Unidentified Image, Movie shot in another camera, Cannot mark image, Jpeg file

Unidentified Image:	You attempted to replay an image that was recorded
	in a special format (proprietary format used by the
	camera of another manufacturer, etc.), or to replay a
	movie shot in another camera.
Protected!:	You attempted to erase a protected image.
Too many marks:	Too many images have been marked for printing or for
	inclusion in a slide show. Cannot process any more.
Cannot mark image:	You attempted to set the print settings for an non-
	JPEG file.
Cannot complete!:	Couldn’t save the print or slide show settings.
Cannot edit:	Slide show settings file is corrupted

The following message may appear on the camera’s LCD monitor when Card Photo Printer CP-10 is printing.

No Paper:	Paper cassette is incorrectly inserted or out of paper.
	Or the paper feed isn’t operating correctly.
No Ink:	The ink cartridge has not been inserted or has run out
	of ink.
Ink Cassette Error:	The ink cassette is experiencing a problem.
Paper Jam:	The paper jammed during printing.
Communication Error:	The printer is experiencing a data transmission error.
Cannot trim:	You attempted to trim an image from another
	camera, one recorded in a different format, or one
	that has been edited on a computer.
Readjust trimming:	You attempted to print the image with a different
	style than the one used when the trimming settings
	were set.
Cannot Print!:	You attempted to print an image from another
	camera, one recorded in a different format, or one
	that has been edited on a computer.
Could not print xx images:	You attempted to use the DPOF print settings to print
	xx images that are from another camera, that have
	been recorded in a different format, or that have been
	edited on a computer.

Appendices 137