Canon PowerShot G2 manual Turn the main dial to Confirm That the TV is turned off

Shooting / Replaying with a TV Monitor

A video-compatible television connected via the supplied AV cable AVC-DC100 can be used to view images as you shoot or replay them.

1	Turn the main dial to	and confirm
	that the TV is turned off.
2	Attach AV cable AVC-DC100 to the A/V
	OUT terminal on the camera.

Yellow	To the	Plug the other ends of the AV cable to
Plug	Video In Jack	3 the video in and audio in jacks on the
		TV.

			Turn on the TV and switch it to Video
Black	To the	4 mode.
Plug	Audio In Jack
		5	Turn the camera’s main dial to	or .
			• The image will appear on the TV. Shoot or
			replay images as usual.
			• If the images are not appearing on the TV
			when shooting, press the	button.

• No image will display in the LCD monitor when the camera is connected to a TV monitor.

•The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 119). The default setting will vary between regions.

NTSC: Japan, U.S.A., Canada, Taiwan, etc

PAL: Europe, Asia (Excluding some areas), Oceania, etc

•You can plug the AV cable into either the left or right input jack on the TV. Please consult the TV’s manual for details.

•A TV monitor cannot be used inmode.

120 Shooting / Replaying with a TV Monitor