Canon PowerShot G2 Charging the Battery Pack, Attach the car battery cable to, Charge adapter

Charging the Battery Pack

To a Car’s Cigarette Lighter Socket

1	Attach the car battery cable to the
	charge adapter.

2 With the engine running, plug the car battery cable into the cigarette lighter socket.

3	Attach the battery pack.
	• Align the battery pack with the ▲ mark on the
	charge adapter and slide it in the direction of
	the arrow.
	• Up to two Battery Pack BP-511s can be placed
	in the charge adapter simultaneously.
	• Either slot, A or B, can be used to charge a
	single battery pack. When two are placed in the
	charge adapter, the first one to be installed will
	start charging. The second battery pack will start
	charging after the first has been fully charged.
	• If two battery packs have been placed in the
	charge adapter before it is plugged into the
	cigarette lighter socket, the one placed in the A
	side will charge first. (B side will start after A side
	is fully charged.)
	• The red light will flash while a battery pack is
	charging and shine steady when it is charged.
	• It takes approximately 80 minutes to charge a
	single battery pack.

4 After charging, remove the battery pack.

• Remove the battery pack by sliding it in the opposite direction from which it was installed.

22Preparing the Camera