Canon PowerShot G2 manual Shooting / Replaying, Press Button on the camera until

Shooting / Replaying

Remote Sensor

Transmitter

The wireless controller can be used to shoot or replay. The wireless controller can be operated from an approximate distance of up to 5 m (16.4 ft.) from the remote sensor.

Shooting

Press the	button on the camera until the	icon appears in the display
panel, then replay with the wireless controller.

(1)Compose the image with the zoom buttons.

(2)Press the shutter button.

The camera will shoot the image 2 seconds later.

•Each press of this button cycles the LCD monitor to the next display mode. The order is LCD monitor on (no display), LCD monitor on (detailed display) and LCD monitor off.

Replaying

The icon appears in the display panel.

•Display the

previous image

•Replay the movie

images

•Display the next image

•In magnified mode, these buttons move the magnified area around the image.

•In index replay, these buttons move the image selection.

•The display mode changes with each press of the button.

•The display cycles between magnifications of approximately 3 or 6.

•Display images in sets of nine (index replay).

•The operable range of the wireless controller will shorten under the following circumstances.

-When the wireless controller is used at an angle to the remote sensor.

-When strong light strikes the camera.

-When the battery is weak.

•The remote sensor may be blocked when Macro Ring Lite MR-14EX is attached to the camera, preventing the use of the wireless controller.

122Using the Wireless Controller