GE Monogram ZISB42D, ZIS42N, ZISW42D Built-In Refrigerators, Thick, 41-1/2, Cabinet

DESIGN INFORMATION

Design Information
Installation Examples	42" Built-In Refrigerators
Side panels are required whenever the sides of the refrigera-	Therefore, the rough-in dimensions must allow for side panel
tor will be exposed.	thickness. In both a flush and semi-flush installation, the
1/2" to 3/4" side panels are normally set into place and	finished dimension, (the width of the opening after side panels
	are installed), must accommodate the full width of the
fastened to adjacent cabinetry or to the back wall before	refrigerator.
rolling the refrigerator into the opening.
	See page 14 for side panel sizes.

Installation

Between

Base &

Wall Cabinets

Flush and Semi-Flush

	Installations
	1/4" Thick
	Side Panels
Finished Dim.	41-1/2"
Roughed-In Dim.	42"

Note: 1/4" thick side panels can be inserted into the case trim, making the rough-in the same as the outside trim width, 42".

Refrigerator

Cabinet

Refrigerator door

Cabinet

1/4" Side Panels. Insert end of

side panel into trim

Installation At End-of-Run

Flush and Semi-Flush

Installations

1/2" Thick

Side Panels

42" Finished Dim.

43" Rough-In Dim.

Note: 1/2" thick side panels shown. Side panels can be any thickness. Add side panel thickness to outside trim width (42") to calculate the rough-in dimension. The leading (front) edge must be finished to match surrounding cabinetry.

Refrigerator

Cabinet

Refrigerator door

Cabinet

1/2" To 3/4" Side Panels. Leading

Edge Flush With Cabinet

Frameless Cabinets

Side panels, 1/2" minimum thickness are required when using frameless cabinets. The side panel acts as a spacer between the cabinet and the case trim and prevents interference with cabinet door swing. The leading (front) edge must be finished to match surrounding cabinetry.

1/2" To 3/4" Side Panels. Leading

Edge Flush With Cabinet

Refrigerator

Cabinet

Refrigerator door

Accessory Panel Kits

Field installed door and grille panels are required. The factory installed trim will accept accessory panel kits. White or black Lexan® and stainless steel kits are available. Panels are cut to size and ready to install. These panel kits must be ordered separately.

Model	Black	White	Stainless
ZIS42N	ZWBP42	ZWWP42	ZWSP42
ZISW42D		ZWWP42D	ZWSP42D
ZISB42D	ZWBP42D		ZWSP42D

A wide range of custom appearance options can be created with optional custom trim kits. See the opposite page for examples and trim kit descriptions.

4