PEAP-GTC and LEAP Error Messages and Prompts | Cisco Systems PI21AG

PEAP-GTC and LEAP Error Messages and Prompts

Appendix A EAP Messages

PEAP-GTC and LEAP Error Messages and Prompts

PEAP-GTC and LEAP Error Messages and Prompts

Error Message There is an error in the configuration profile. Please verify the configuration and save it.

Recommended Action Authentication with this profile fails until the profile is fixed. Contact your network administrator for assistance with fixing the profile.

Error Message No trusted CA(s) selected.

Recommended Action Select at least one trusted CA, or allow the user to authorize new trusted CAs.

Error Message You entered an empty username, which is not allowed.

Recommended Action Enter a username.

Error Message You entered different values in the Password field and the Confirm password field. The passwords must be identical.

Recommended Action Re-enter your password in both fields.

Error Message You entered different values in the New Password field and the Confirm New Password field. The passwords must be identical.

Recommended Action Re-enter your password in both fields.

Error Message The password that you entered in the Old password field does not match the password that was used previously.

Recommended Action Re-enter your old password in the Old password field.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista

	A-6	OL-16534-01

Image 130

Cisco Systems PI21AG, CB21AG manual PEAP-GTC and LEAP Error Messages and Prompts

Contents

Cisco Systems, Inc 170 West Tasman Drive San Jose, CA Software ReleaseAmericas Headquarters 800 553-NETS Fax 408 Turn the television or radio antenna until the interference stops FCC Safety Compliance Statement Network Configurations Using Client AdaptersAd Hoc Wireless LAN Preface Obtaining Client Adapter Software Advanced Roaming SettingTwo-Phase Tunneled Authentication Inserting the Card Configuring and Starting Logging Accessing LEAP Properties for ConfigurationConfiguring LEAP Finding the Version of the LEAP Module EAP Messages A-1 Creating Strong Passwords A-9Antenna Installation Warning English Translation D-7 Chinese Translation ChannelsAcknowledgments and Licensing F-1 English Translation viii OL-16534-01 Purpose PrefaceAudience Audience, page Purpose, page Organization, page Conventions, page Organization Conventions Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien varoitusten käännökset löydät liitteestä Translated Safety Warnings käännetyt turvallisuutta koskevat varoitukset Related Publications Obtaining Documentation, Obtaining Support, and Security Guidelines Safety information, page Unpacking the Client Adapter, page Product Overview and InstallationNetwork Configurations Using Client Adapters, page Installing the Client Adapter Driver and Software, page PC-Cardbus Introduction to the Client AdaptersTerminology card Radio Antenna Hardware ComponentsRadio LEDs Ad Hoc Wireless LAN Network Configurations Using Client AdaptersSoftware Components Wireless Infrastructure with Workstations Accessing a Wired LAN Figure 1-1 Ad Hoc Wireless LAN FCC Safety Compliance Statement Safety informationSafety Guidelines Unpacking the Client Adapter Warnings http//support.microsoft.com/kb/932063 Package ContentsSystem Requirements http//support.microsoft.com/kb/935222 For Infrastructure Devices Site RequirementsFor Client Devices Inserting a PC-Cardbus Card Inserting the Client Adapter1-10 Insert the card see the “Inserting the Card” section on page Inserting a PCI CardChanging the Bracket Assemble the antenna see the “Assembling the Antenna” section on page Inserting the Card 1-12 Assembling the Antenna 1-13 Mounting the Antenna 1-14 1-15 Step 1 Perform one of the following 1-16 Step 8 If the Found New Hardware Wizard window appears, click Cancel Obtaining Client Adapter Software Step 5 Click Wireless SoftwareStep 7 Click Cisco Aironet Wireless LAN Client Adapters Step 6 Click Client Adapters and Client Software Installing the Client Adapter Driver and Software 1-18 Figure 1-11 Cisco Aironet Installation Program Window 1-19Hardware Insertion 1-20 Figure 1-13 Cisco Aironet Installation Program-Setup Status Window 1-21 Step 8 Click Finish 1-22 Accessing Microsoft Vista Network and Sharing Center, page Configuring Wireless ProfilesOverview of Wireless Profiles, page Creating a New Profile and Configuring Basic Settings, page Overview of Wireless Profiles Accessing Microsoft Vista Network and Sharing Center Creating a New Profile and Configuring Basic Settings Cisco Aironet 802.11a/b/g Wireless Adapter see Figure Creating a New Profile and Configuring Basic Settings Step 7 In this dialog box, enter information for the wireless network that you want to add.Table 2-1 lists and describes general settings for the profile. Follow the instructions in the table to configure these settings Setting Encryption Types” section on pageWhat to Enter and Encryption Types” section on page Chapter 3, “Configuring EAP Types.” The enterprise network EAPProfile Management General Settings continued Setting WPA and WPA2 Security and Encryption TypesWEP Shared Security with Static WEP Keys 2-10 802.1X with Dynamic WEP Keys 2-11 CCKM Fast Secure Roaming Accessing a Profile That Was Created Previously2-12 2-13 Viewing and Changing the Settings of a ProfileFigure 2-7 Network and Sharing Center Window 2-14 Figure 2-8 Wireless Network properties Dialog Box-Connection Tab page 2-18 and the “Advanced Roaming Setting” section on page is available, Choose Control Panel Manage Wireless NetworksSettings dialog box. See the “Radio Measurement” section on in Table 2-1 on page 2-16 Figure 2-9 Wireless Network properties Dialog Box-Security Tab 2-17 Radio Measurement 2-18 Advanced Roaming Setting 2-19 2-20 How LEAP Works, page Configuring LEAP, page Configuring EAP TypesConfiguring EAP-FAST, page Overview of LEAP, page Configuring PEAP-GTC, page Protected Access Credentials, page Two-Phase Tunneled AuthenticationTwo-Phase Tunneled Authentication, page How EAP-FAST Works Protected Access Credentials Server Certificate Validation Accessing EAP-FAST Properties for Configuration, page Configuring EAP-FASTAccessing EAP-FAST Properties for Configuration Configuring EAP-FAST Settings in the Connection Tab, page Configuring EAP-FAST Settings in the Connection Tab Default On Default anonymous Default Enabled Default OnDefault None Use Protected Access Default Off PAC box and the Validate Server Certificate box at the same time Overview of the User Credentials Tab Usernames and PasswordsClient Certificates 3-10 Configuring EAP-FAST Settings in the User Credentials TabFigure 3-3 User Credentials Tab in EAP-FAST Properties Window Mode with OTP” section on page information about OTP, see the “Understanding PIN Mode and Token3-11 Figure 3-4 New PIN Prompt Window Understanding PIN Mode and Token Mode with OTP3-12 Figure 3-5 Next Token Prompt Window Configuring EAP-FAST Settings in the Authentication Tab 3-13 Table 3-3 lists and describes options for authentication 3-14Figure 3-6 Authentication Tab in EAP-FAST Properties Window 3-15 Default Disableda certificate on this computer radio button in the User Select an authentication 3-16 Finding the Version of the EAP-FAST ModuleFigure 3-7 About Tab in EAP-FAST Properties Window How LEAP Works Overview of LEAP3-17 Accessing LEAP Properties for Configuration, page Configuring LEAPAccessing LEAP Properties for Configuration Configuring LEAP Settings in the Network Credentials Tab, page 3-19 Configuring LEAP Settings in the Network Credentials TabFigure 3-8 Wireless Network Properties Window Table 3-4 LEAP Network Credentials Settings 3-20Settings LEAP Network Credentials Finding the Version of the LEAP Module Overview of PEAP-GTC3-21 How PEAP-GTC Works 3-22 Accessing PEAP-GTC Properties for Configuration, page Configuring PEAP-GTCAccessing PEAP-GTC Properties for Configuration Configuring PEAP-GTC Settings in the Connection Tab, page 3-24 Figure 3-10 Wireless Network Properties Window 3-25 Configuring PEAP-GTC Settings in the Connection TabFigure 3-11 Connection Tab in PEAP-GTC Properties Window prompt user to authorize new servers or trusted certificate Default anonymousIf the Validate server certificate box is checked and the Do not If the Validate server certificate box is checked but the Do not Configuring PEAP-GTC Settings in the User Credentials Tab 3-27 and Token Mode with OTP” section on page Default Offpassword option which is the case for the Prompt automatically for username and PEAP-GTC User Credentials Options continued 3-29Figure 3-13 New PIN Prompt Window 3-30 Understanding PEAP-GTC AuthenticationFinding the Version of the PEAP-GTC Module Figure 3-14 Next Token Prompt Window The EAP-FAST XML Schema, page The PEAP-GTC XML Schema, page Performing Administrative TasksUsing Microsoft Tools to Perform Administrative Tasks, page The LEAP XML Schema, page Logging for EAP Modules, page Adding a Group Policy Object Editor Using Microsoft Tools to Perform Administrative TasksOverview of Group Policy Objects Overview of Group Policy Objects, page a. Go to File Add/Remove Snap-in Creating a EAP Group Policy Object in Windows Vistag. From the Select Group Policy Object dialog box, click Finish Configuring Machine Authentication for EAP-FAST Configuring Machine Authentication for PEAP-GTC Configuring Single Sign-On for EAP-FASTConfiguring Single Sign-On for PEAP-GTC and LEAP The EAP-FAST XML Schema xsdocumentation xselement xschoice xselement name=authenticateWithToken xscomplexType xssequence 4-10 xselement xselement name=sendViaInnerMethod xscomplexType xsall 4-11 xscomplexType name=PasswordFromProfile xssimpleContent 4-12 4-13 xsannotation xselement xschoice xselement name=enableFastReconnect 4-14 4-15 xssimpleType xsrestriction base=xsstring xsenumeration value=exactly 4-16 xselement name=anyServerName type=Empty xsannotation The PEAP-GTC XML Schema 4-17 4-18 4-19 xscomplexContent xscomplexType xscomplexType name=IdentityPattern 4-20 xscomplexType name=TokenSource xschoice 4-21 xschoice xssequence xscomplexType 4-22 The LEAP XML Schema 4-23 4-24 attributeFormDefault=unqualified xselement name=eapLeap type=EapLeap 4-25 Step 1 Choose Start All Programs Accessories Configuring and Starting LoggingConfiguring and Starting Logging, page Step 2 Right-click Command Prompt and select Run as administrator wevtutil sl Cisco-EAP-PEAP/Debug /efalse Disabling Logging and Flushing Internal Bufferswevtutil sl Cisco-EAP-FAST/Debug /efalse wevtutil sl Cisco-EAP-LEAP/Debug /efalse wevtutil sl Cisco-EAP-PEAP/Debug /lfn“pathtoetllogfile” Locating Log Fileswevtutil sl Cisco-EAP-FAST/Debug /lfn“pathtoetllogfile” wevtutil sl Cisco-EAP-LEAP/Debug /lfn“pathtoetllogfile” Removing a Client Adapter, page Routine ProceduresUpgrading the Client Adapter Software, page Removing a PC-Cardbus Card Removing a Client AdapterRemoving a PCI Card Upgrading the Client Adapter Software Step 5 Click Update the previous installation Figure 5-3 Cisco Aironet Installation Program-Setup Status Window Step 8 Click Finish Troubleshooting with Cisco Aironet Client Diagnostics, page Troubleshooting and DiagnosticsEnabling Client Reporting, page Troubleshooting with Cisco Aironet Client Diagnostics Figure 6-1 Network and Sharing Center Window Figure 6-2 Cisco Aironet Client Diagnostics Dialog Box Figure 6-3 Cisco Aironet Client Diagnostics Dialog Box-Choose Adapter Figure 6-5 Cisco Aironet Client Diagnostics Dialog Box-Testing Delay Figure 6-6 Cisco Aironet Client Diagnostics Dialog Box-Test Window Figure 6-7 Aironet Desktop Utility-Stop Running Diagnostics Enabling Client Reporting PEAP-GTC and LEAP Error Messages and Prompts, page A-6 EAP-FAST Error Messages and PromptsEAP-FAST Error Messages and Prompts, page A-1 Creating Strong Passwords, page A-9 Appendix A EAP Messages EAP-FAST Error Messages and Prompts Page Recommended Action Enter a username Recommended Action Press OK to continue PEAP-GTC and LEAP Error Messages and Prompts Page Page Characteristics of Strong Passwords Creating Strong PasswordsCharacteristics of Weak Passwords Password Security Basics A-10 Radio Specifications, page B-3 Technical SpecificationsA P P E N D I X B Physical Specifications Radio Specifications 5470 to 5725 MHz 5150 to 5250 MHz5250 to 5350 MHz 5725 to 5805 MHz Indoor typical Outdoor typical Power Specifications Safety and Regulatory Compliance Specifications A P P E N D I X C Translated Safety WarningsAntenna Installation Warning, page C-3 Explosive Device Proximity Warning, page C-2 Explosive Device Proximity Warning Antenna Installation Warning Warning for Laptop Users Page Page Department of Communications - Canada, page D-3 Declarations of Conformity and Regulatory InformationA P P E N D I X D Declaration of Conformity for RF Exposure, page D-7 FCC Certification Number LDK102050 CB21AG European Community, Switzerland, Norway, Iceland, and Liechtenstein Department of Communications - CanadaCanadian Compliance Statement Page Cisco Aironet CB21AG Wireless LAN Client Adapter Declaration of Conformity Statement Cisco Aironet PI21AG Wireless LAN Client Adapter English Translation Declaration of Conformity for RF ExposureJapanese Translation 03-6434-6500 Chinese Translation 2.4- and 5-GHz Client AdaptersEnglish Translation Brazil/Anatel Approval 5-GHz Client Adapters AIR-CB21AG-W-K9 D-10 AIR-PI21AG-W-K9 D-11 D-12 A P P E N D I X E Channels, page E-2 Maximum Power Levels and Antenna Gains, page E-4Channels, Power Levels, and Antenna Gains Channels IEEE 802.11a IEEE 802.11b/g Regulatory Domains Maximum Power Levels and Antenna Gains IEEE 802.11b IEEE 802.11g Maximum Power Levels and Antenna Gains Acknowledgments and Licensing A P P E N D I X F Appendix F Acknowledgments and Licensing Appendix F Acknowledgments and Licensing OL-16534-01 Appendix F Acknowledgments and Licensing Abbreviations A P P E N D I X G Table G-1 List of Acronyms continued