Cisco Systems CB21AG, PI21AG manual Creating a EAP Group Policy Object in Windows Vista

Chapter 4 Performing Administrative Tasks

Using Microsoft Tools to Perform Administrative Tasks

Step 2 Add the Group Policy Object Editor snap-in:

a.Go to File > Add/Remove Snap-in...

The Add or Remove Snap-insdialog box is displayed.

b.From the Add or Remove Snap-ins dialog box, highlight Group Policy Object Editor in the Available snap-ins list, and click the Add button.

The Select Group Policy Object dialog box is displayed.

c.From the Select Group Policy Object dialog box, click Browse. The Browse for a Group Policy Object dialog box is displayed.

d.From the Browse for a Group Policy Object dialog box, select the Domains/O Us tab.

e.Select your domain controller from the Look in drop down list.

f.Click OK.

g.From the Select Group Policy Object dialog box, click Finish.

h.From the Add or Remove Snap-insdialog box, click OK.

Now the Group Policy Object Editor is ready for use.

Creating a EAP Group Policy Object in Windows Vista

To create a new EAP group policy object , perform the following steps:

Step 1 In the Default Domain Policy pane, select Windows Settings > Security Settings > Wireless Network Policies.

Step 2 Right-clickWireless Network Policies and select Create a New Policy.

Step 3 Set your wireless network properties, such as SSID, encryption, and authentication method. Step 4 Select the EAP method.

Step 5 Open properties for the desired EAP modules and configure the settings.

•EAP-FAST—In the Advanced Security screen, you can configure supplicant settings such as machine authentication and SSO. For more information about machine authentication, see the “Configuring Machine Authentication for EAP-FAST” section on page 4-4. For more information about SSO see the “Configuring Single Sign-On for EAP-FAST” section on page 4-5.

•PEAP-GTC—In the Advanced Security screen, you can configure supplicant settings such as machine authentication and SSO. For more information about machine authentication, see the “Configuring Machine Authentication for PEAP-GTC” section on page 4-5. For more information about SSO see the “Configuring Single Sign-On for PEAP-GTC and LEAP” section on page 4-5

•LEAP—In the Advanced Security screen, you can configure supplicant settings for SSO. FOr more information about SSO, see the “Configuring Single Sign-On for PEAP-GTC and LEAP” section on page 4-5

Note You can configure settings for a wired network by selecting the Wired Network Policy object.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista

OL-16534-01 4-3