Cisco Systems PI21AG and Token Mode with OTP” section on page, Default Off, password option, 3-28

Chapter 3 Configuring EAP Types

Configuring PEAP-GTC

The user can configure PEAP-GTC user credentials from the User Credentials tab (see Figure 3-12).

Figure 3-12 User Credentials Tab in PEAP-GTC Properties Window

Table 3-2lists and describes options for PEAP-GTC user credentials.

Table 3-6 PEAP-GTC User Credentials Options

		User Credentials	Description
		Use one-time password	Click this radio button to use a one-time password (OTP). In this
			mode, credentials are never cached. Each time the server asks for
			credentials, the user is prompted to supply credentials.
			For more information about OTP, see the “Understanding PIN Mode
			and Token Mode with OTP” section on page 3-12.
			Default: Off
		Use Windows username and	Click this radio button to use the Windows username and password as
		password	the PEAP-GTC username and password for network authentication.
			This mode only affects single sign-on authentication when the login
			screen has one set of credentials instead of two sets of credentials,
			which is the case for the Prompt automatically for username and
			password option.
			Default: On
	Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
3-28			OL-16534-01