Cisco Systems PI21AG, CB21AG 3-20, LEAP Network Credentials, Settings, Description, Default On

Chapter 3 Configuring EAP Types

Configuring LEAP

•Saved user credentials—These are user credentials that are entered as part of the LEAP configuration. The user is not prompted for credentials during authentication unless the saved credentials fail or have expired. New credentials that the user enters after successful authentication are saved automatically in the configuration. The user does not have to return to the configuration screen to change the old saved credentials.

You can configure LEAP network credentials settings from the Network Credentials tab (see Figure 3-9).

Figure 3-9 Network Credentials Tab in LEAP Properties Window

Table 3-4lists and describes LEAP network credentials settings.

Table 3-4 LEAP Network Credentials Settings

LEAP Network Credentials
Settings	Description
Use Windows username and	Click this radio button to use the Windows username and password as
password	the LEAP username and password for network authentication.
	Default: On

	Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
3-20	OL-16534-01