HP LaserJet Enterprise 500 Network Settings menu

Network Settings menu

In the following table, asterisks (*) indicate the factory default setting.

Table 3-28Network Settings menu
First level	Values	Description
I/O Timeout	Range: 5 – 300 sec	Use this feature to set the I/O timeout period
	Default = 15	in seconds. I/O timeout refers to the elapsed
		time before a print job fails. If the stream of
		data that the product receives for a print job
		gets interrupted, this setting indicates how
		long the product will wait before it reports
		that the job has failed. The range is 5 - 300
		seconds. The default setting is 15 seconds.
Jetdirect Menu	See the table that follows for details.

Table 3-29	Jetdirect Menu
First level	Second level	Third level	Fourth level	Fifth level	Values	Description
Information	Print Sec				Yes	Yes: Prints a
	Report				No*	page that contains
						the current
						security settings
						on the HP Jetdirect
						print server.
						No: A security
						settings page is
						not printed.
TCP/IP	Enable				On*	On: Enable the
					Off	TCP/IP protocol.
						Off: Disable the
						TCP/IP protocol.
	Host Name				Use the arrow	An alphanumeric
					buttons to edit the	string, up to 32
					host name.	characters, used
					NPIXXXXXX*	to identify the
						product. This
						name is listed on
						the HP Jetdirect
						configuration
						page. The default
						host name is
						NPIxxxxxx, where
						xxxxxx is the last
						six digits of the
						LAN hardware
						(MAC) address.

ENWW Tools for troubleshooting 365