HP Enterprise 500 manual 48MP modes under the Optimize submenu

Table 3-47Print modes under the Adjust Paper Types sub menu (continued)

Resistance Mode	Set to Up to resolve print-quality issues caused by poor
	secondary transfer in low-humidity environments with resistive
	or rough surface media.
Humidity Mode	With glossy film, set to High when the product is in a high-
	humidity environment and print-quality defects occur on HP
	Tough Paper or Opaque film.
	With transparencies, set to High when the product is in a
	high-humidity environment and print-quality defects occur on
	color transparencies on the first page of a print job.
	With all other paper types, set to High when the product is in
	a high-humidity environment and light density occurs on the
	first page of a print job.
Pre-Rotation Mode	Set to Alternate 1 when horizontal banding occurs with the
	drum pitch.
	Set to Alternate 2 when problems like fade finger (trailing
	edge toner starvation) occurs after high coverage continuous
	printing.
Fuser Temp Mode	If you are seeing a faint image of the page repeated at the
	bottom of the page or on the following page, first make sure
	the paper type (Adjust Paper Types menu) and Print
	Mode settings are correct for the type of paper you are
	using. If you continue to see ghost images on your print jobs,
	set the Fuser Temp feature to one of the settings.
	Normal
	Up
	Down
Paper Curl Mode	Use in high-humidity and high-temperature environments. The
	Reduced setting decreases fuser temperature and increases
	the interpage gap.

Table 3-48MP modes under the Optimize submenu

Normal Paper	Set to Smooth when printing on smooth paper of normal
	weight.
Heavy Paper	Set to Smooth when printing on smooth, heavy media types.
Envelope Control	Use this mode if envelopes are sticking together due to
	moisture in the envelope adhisive.
	Normal
	Reduced Temperature Multipurpose Mode
Environment	Set to Low Temp if the product is operating in a low-
	temperature environment and you are having problems with
	print quality such as blisters in the printed image.

ENWW Use manual print modes 495