Pickup roller (Tray 2)

CAUTION: Do not touch the spongy roller surface unless you are replacing the roller. Skin oils on the roller can cause paper pickup problems.

1.Look up into the Tray 2 cavity (where the cassette would be installed), and pull down to release the blue roller-locking lever.

Reinstallation tip When the roller is reinstalled, rotate the roller shaft several times to make sure that the shaft correctly engages the drive mechanism. You should hear a click when the shaft engages the drive mechanism.

Figure 2-23Remove the pickup roller (Tray 2; 1 of 4)

2.Pull the roller toward the front of the product to release the rear of the roller shaft. Figure 2-24Remove the pickup roller (Tray 2; 2 of 4)

ENWW

Customer self repair (CSR) components 89