HP Enterprise 500 manual Intermediate transfer belt ITB

Intermediate transfer belt (ITB)

CAUTION: Do not touch the black-plastic belt. Skin oils and fingerprints on the belt can cause print- quality problems. Always place the ITB on a flat surface in a safe and protected location.

1.Open the right door assembly.

2.Use the blue lever (callout 1) to lower the secondary transfer assembly. Figure 2-38Remove the intermediate transfer belt (1 of 3)

1

3.Grasp the small handles on the ITB and then pull the ITB out of the product until two large handles expand along the right- and left-side of the ITB.

Figure 2-39Remove the intermediate transfer belt (2 of 3)

98 Chapter 2 Removal and replacement ENWW