HP Enterprise 500 manual 26Remove the pickup roller Tray 2 4 Removal and replacement

3.Rotate the roller shaft down and away from the product, and then slide the roller toward the rear of the product to release the front of the roller shaft.

Figure 2-25Remove the pickup roller (Tray 2; 3 of 4)

4.Remove the pickup roller.

Reinstallation tip Make sure that the roller is orientated correctly when it is reinstalled the large white collar should be positioned toward the front of the product.

Figure 2-26Remove the pickup roller (Tray 2; 4 of 4)

90 Chapter 2 Removal and replacement ENWW