Reinstall the main drive assembly

1.Remove the bracket (callout 1), two guides (callout 2), and the developing disengagement motor (callout 3).

Install the bracket and guides on the replacement main drive assembly.

NOTE: Do not install the developing disengagement motor on the assembly (this motor must be removed from the assembly to align the main drive cams).

Figure 2-206Reinstall the main drive assembly (1 of 11)

1

3

2

2.Locate the cams (callout 1) on the back side of the assembly. Figure 2-207Reinstall the main drive assembly (2 of 11)

1

ENWW

Internal assemblies 217