Internal assemblies

TIP: For clarity, some photos in this chapter show components removed that would not be removed to service the product. If necessary, remove the components listed at the beginning of a procedure before proceeding to service the product.

Delivery fan, cartridge fan, and environmental sensor

Before proceeding, remove the following components:

●Toner collection unit. See Toner collection unit on page 79.

●Left cover. See Left cover on page 111.

Remove the delivery fan, cartridge fan, and environmental sensor

1.Remove five screws (callout 1), and then remove the sheet-metal plate (callout 2). Figure 2-86Remove the delivery fan, cartridge fan, and environmental sensor (1 of 9)

2

1

ENWW

Internal assemblies 131