Rear top cover
Before proceeding, remove the following components:
●Toner collection unit. See Toner collection unit on page 79.
●Left cover. See Left cover on page 111.
●Hardware integration pocket (HIP). See Hardware integration pocket (HIP) (dn and xh models only) on page 115.
●Control panel assembly. See Control panel assembly on page 116.
●Front top cover. See Front top cover on page 122.
●Rear cover and rear upper cover. See Rear cover and upper rear cover on page 124.
Remove the rear top cover
1.Remove two screws (callout 1).
Figure
1
ENWW | Covers 127 |