HP Enterprise 500 Disk drives, Remove the HDD, Before proceeding, remove the following components

Disk drives

NOTE: The product has a hard disk drive (HDD) or solid state module (SSM) installed. If you install a replacement disk drive, you must perform reload the product firmware. See Reload the firmware

on page 85.

Before proceeding, remove the following components:

●Formatter PCA. See Formatter PCA on page 81

Remove the HDD

CAUTION: ESD sensitive component.

1.Place the formatter on a clean, flat, grounded surface.

2.Release the lcoking tab to release the HDD. Figure 2-13Remove the HDD (1 of 2)

82 Chapter 2 Removal and replacement ENWW