HP Enterprise 500 manual 23General Print Settings menu

Table 3-23General Print Settings menu (continued)

First level Second level Values Description

Personality	Auto*
	PCL
	PS
	PDF

Use this feature to configure the default print language or personality for the product. Normally you should not change the product language (the default is Auto). If you change the setting to a specific product language, the product does not automatically switch from one language to another unless specific software commands are sent to it.

PCL Form Length Range: 5 – 128

Default = 60

Use this menu to control the PCL print-command options. PCL is a set of printer commands that Hewlett-Packard developed to provide access to printer features.

Form Length

		Use this feature to select the user-
		soft default vertical form length.
		The range is from 5 to 128 lines.
		The factory default setting is 60
		lines.
Orientation	Portrait*	Select the orientation that is most
	Landscape	often used for copy or scan
		originals. Select Portrait if the
		short edge is at the top or select
		Landscape if the long edge is
		at the top.
Font Source	Internal*	Use this feature to select the font
	Soft	source for the user-soft default
		font. The factory default setting is
	USB <X>	Internal. The list of available
		options varies depending on the
		installed product options.
Font Number	Range: 0 – 999	Use this feature to specify the
	Default = 0	font number for the user-soft
		default font using the source that
		is specified in the Font Source
		menu item. The product assigns a
		number to each font and lists it
		on the PCL font list. The font
		number appears in the Font #
		column of the printout.

350 Chapter 3 Solve problems ENWW