HP Enterprise 500 manual 142Remove the high voltage power supply lower 4

4.Rotate the top of the power supply away from the chassis, and then disconnect one connector (callout 1). Remove the power supply.

Reinstallation tip Make sure the cables do not get stuck behind or damaged by the sheet metal.

Figure 2-142Remove the high voltage power supply lower (4 of 4)

1

Reinstall the high voltage power supply lower

When you reinstall the power supply, look through the holes in the PCA and make sure that the high voltage contact springs are correctly seated against the PCA.

Figure 2-143Reinstall the high voltage power supply lower

ENWW Internal assemblies 169