HP Enterprise 500 manual Manual sensor test, 7Manual sensor diagnostic tests

Manual sensor test

Use this diagnostic test to manually test the product sensors and switches. Each sensor is represented by a letter and number on the control panel display.

1.Press the Home button.

2.Open the following menus:

●Administration

●Troubleshooting

●Diagnostic Tests

3.Press the Down arrow button to highlight the Manual Sensor Test item, and then press the OK button.

To exit this diagnostic, press the Stop key, and then select Exit Troubleshooting.

Menus cannot be opened during this test, so the OK button serves the same function as the Stop button.

Table 3-7Manual sensor diagnostic tests

Sensor or switch name	Sensor or switch number
Front door switch	SW1
Registration	SR8
Fuser loop 1	SR14
Fuser loop 2	SR15
Fuser pressure release	SR7
Fuser output	SR5
Duplexer refeed	SR22
Developer alienation	SR11
ITB alienation	SR17
Output bin full	SR6

260 Chapter 3 Solve problems ENWW