HP Enterprise 500 manual Dest IPv4, Dest IPv6, Packet Size

Table 3-29	Jetdirect Menu (continued)
First level	Second level	Third level	Fourth level	Fifth level	Values	Description
	Ping Test	Dest Type			IPv4	This test is used to
					IPv6	check network
						communications.
						This test sends
						link-level packets
						to a remote
						network host, then
						waits for an
						appropriate
						response. To run
						a ping test, set the
						following items:
						Dest Type
						Specify whether
						the target product
						is an IPv4 or IPv6
						node.
		Dest IPv4			Range: 0 – 255	Type the IPv4
					Default =	address.
					127.0.0.1
		Dest IPv6			Select from a	Type the IPv6
					provided list.	address.
					Default = : : 1
		Packet Size			Default = 64	Specify the size of
						each packet, in
						bytes, to be sent
						to the remote host.
						The minimum is
						64 (default) and
						the maximum is
						2048.
		Timeout			Default = 001	Specify the length
						of time, in
						seconds, to wait
						for a response
						from the remote

host. The default is 1 and the maximum is 100.

ENWW Tools for troubleshooting 377