HP Enterprise 500 manual Low Voltage, Tray Normal Alternate, Background Normal Alternate

Table 3-21General Settings menu (continued)

First level	Second level	Third level	Fourth level	Values	Description
		Line Voltage		Normal*	Enable this feature if
				Low Voltage	the product is
					operating in a low
					voltage environment
					and you are having
					problems with print
					quality such as
					blisters in the printed
					image.

Tray 1	Normal*
	Alternate

This feature affects how often the product performs an internal cleaning procedure. Set this feature to Alternate if you are having problems with extra toner on pages. The product performs the cleaning procedure after each job that is printed from Tray 1. Using this mode increases wear on all the print cartridges.

Background	Normal*
	Alternate 1
	Alternate 2
	Alternate 3

Use this setting if pages are printing with a shaded background. Using this feature might reduce gloss levels. The default setting is Normal. Use the Alternate 1 setting if you are seeing a shaded background on the entire page. Use the Alternate 2 setting if you are seeing thin vertical lines on the background. The Alternate 3 setting applies the Alternate 1 and Alternate 2 settings at the same time. Use this setting if the first two settings do not correct the problem.

342 Chapter 3 Solve problems ENWW