Close front door
Description
The front door of the product is open.
Recommended action
Close the door.
Use the switch test in the manual sensor test to verify that the
Check the sensor flag on the
If the product has been recently serviced, check the connector (j62) on the 24V interlock switch and the connectors (J61, J100, and J118) on the DC controller PCA.
Close lower right door
Description
The 1 x
Recommended action
Open, and then close the door.
Use the
Check the sensor flag on the right door assembly. If it is damaged, replace the lower right door assembly.
Close upper right door
Description
The message appears even though the 1 x
Recommended action
open, and then close the door.
Check the connector (J62) on the 24V interlock switch (SW2) and the connectors (J61, J100, and J118) on the DC controller.
Check the sensor flag on the upper right door assembly. If it is damaged, replace the upper right door assembly.
Creating cleaning page
Description
A cleaning page is being generated.
446 Chapter 3 Solve problems | ENWW |