4.Release one tab (callout 1), and then remove the fan and fan duct (callout 2). Figure 2-153Remove the cassette pickup drive assembly (4 of 10)

2

1

5.Disconnect five connectors (callout 1; J110, J111 on the DC controller PCA), release the FFCs from the guide (callout 2), and then release the wire harnesses from the guides.

NOTE: To locate DC controller connector locations, see DC controller PCA on page 284.

Figure 2-154Remove the cassette pickup drive assembly (5 of 10)

1

2

178 Chapter 2 Removal and replacement

ENWW