Distance between defects | Product components that cause the defect |
|
|
77 mm | Fuser sleeve |
|
|
78 mm | Fuser pressure roller |
|
|
80 mm | Printer: distance from primary transfer roller to secondary transfer roller for black |
|
|
92 mm | Print cartridge station to station pitch: distance from the centerline of one OPC to the |
| centerline of the adjacent OPC |
| ITB: drive roller |
|
|
105 mm | Printer: distance from registration to secondary transfer roller |
|
|
Calibrate the product
Calibration is a product function that optimizes print quality. If you experience any
1.Press the Homebutton.
2.Open the following menus:
●Device Maintenance
●Calibrate/Cleaning
3.Press the Down arrow button to highlight the Full Calibration or Quick Calibration setting, and then press the OK button.
●Full Calibration: takes about 70 seconds and performs color plane registration, environment change control, and Dmax and Dhalf adjustments. Use Full Calibration if colors are misaligned or appear blurry. Full Calibration runs automatically after a replacement transfer belt (ITB) is installed. Full Calibration must be run manually after a laser scanner is replaced.
●Quick Calibration: takes about 45 seconds and performs Dmax and Dhalf adjustments. Use Quick Calibration if colors are wrong, highlights are missing, or if colors are too dark or too light.
ENWW | Tools for troubleshooting 309 |