Troubleshooting 99.00 Error 04 in HP Printer Firmware Upgrades

99.00.02 Upgrade not performed timeout during receive

Description

A remote firmware upgrade (RFU) was not performed.

I/O timeout when reading header number and size. Indicates a problem with the network environment, not the device.

Recommended action

The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.

99.00.03 Upgrade not performed error writing to disk

Description

A remote firmware upgrade (RFU) was not performed.

Disk error. May indicate a problem or a hard disk failure. It might be necessary to check the connection to the hard disk or replace the hard disk.

Recommended action

1.Download the RFU file and attempt the upgrade again.

2.If the error persists, perform the Clean Disk process. You will then need to download firmware from the Preboot menu.

3.If the error persists, replace the hard disk.

99.00.04 Upgrade not performed timeout during receive

Description

A remote firmware upgrade (RFU) was not performed.

I/O timeout when reading rest of header.

Recommended action

The most common cause is an issue with the network environment. Make sure that there is a good connection to the device and attempt the upgrade again, or upgrade using the USB walk-up port.

99.00.05 Upgrade not performed timeout during receive

Description

A remote firmware upgrade (RFU) was not performed.

I/O timeout when reading image data.

434 Chapter 3 Solve problems

ENWW

Image 470

HP Enterprise 500 manual Upgrade not performed timeout during receive, Upgrade not performed error writing to disk

Contents

Laserjet Enterprise 500 Color Page HP LaserJet Enterprise 500 color M551 Printers Copyright and License Conventions used in this guide Conventions used in this guide Table of contents Removal and replacement Vii Enww Enww Solve problems 237 Enww 395 Xiii Upgrade not performed error reading upgrade 435 Enww 457 Xvii Parts and diagrams 525 Appendix a Service and support 575 Appendix B Product specifications 587 Appendix C Regulatory information 589 Index 601 List of tables 484 Xxiii Xxiv List of figures Xxvi 22 Remove the pickup roller Tray 1 2 70 Remove the right front cover 1 118 104 Remove the residual toner feed motor 6 141 145 Remove the developing disengagement motor 2 171 186 Reinstall the PGC actuators 2 199 233 Remove the drawer connector optional paper feeder 236 35 Component locations 5 290 Xxxiv Theory of operation Basic operation 1Relationship between the main product systems Period Duration Description Sequence of operation1Sequence of operation Engine control system 2Engine control system 3DC controller block diagram DC controller Clutches SwitchesSolenoids Component abbreviation Component name Sensors Motors and fans Motors Abbreviation Name Purpose Type Failure detection 6Motors Abbreviation Name Cooling area Type Speed Circuit Description High voltage power supply8High voltage power supply circuits Paper Low voltage power supply 5Low voltage power-supply circuit 9Converted DC voltages Main DC voltage Sub-voltage Behavior Power supply voltage detection SafetySleep powersave mode Low voltage power supply failure 10Fuser components Power off conditionFuser control Type of component Abbreviation Name Function Fuser temperature control circuit 7Fuser temperature control circuit Fuser over temperature protection Fuser failure detection Laser/scanner system 8Laser/scanner system Enww Image formation system 9Image formation system Functional block Steps Description Image formation process11Image formation process Pre-exposure Primary charging Laser-beam exposure Development Primary transfer Secondary transfer Fusing Separation Print cartridge ITB cleaningDrum cleaning Enww Developing roller engagement and disengagement 22Developing-roller engagement and disengagement control Enww Intermediate transfer belt ITB unit 23 ITB unit Primary-transfer-roller engagement and disengagement 12Primary-transfer-roller engagement states Roller state Product state Enww 25ITB cleaning process Calibration Color misregistration control Image stabilization control Description Image stabilization control13Image-stabilization controls Pickup, feed, and delivery system Abbreviation Component SR10 Fuser motor 30Three main units of the pickup, feed, and delivery system Pickup-and-feed unit 31Pick feed mechanism Theory of operation Cassette pickup 32Cassette-pickup mechanism Cassette presence detection 33Cassette presence sensor Theory of operation Cassette lift operation 34Cassette lift mechanism Cassette paper presence detection 35Paper level detection mechanism Theory of operation Cassette media width detection 36Cassette media width detection Multifeed prevention 37Multifeed prevention Multipurpose tray pickup 38Multipurpose tray pickup mechanism Paper feed 39Paper-feed mechanism Theory of operation Skew-feed prevention 40Skew-feed prevention Fusing and delivery unit OHT detection Loop control 42Loop-control mechanism Pressure-roller pressurization control Fuser motor Duplexing unit duplex models 44Duplexing unit Duplexing reverse and feed control Duplex pickup operation Jam Description Jam detection17Jams that the product detects Fuser delivery delay jam Optional paper feeder 18Electrical components for the paper feeder Component Abbreviation Component name Type Paper-feeder pickup and feed operation 48Paper-feeder pickup and feed operation Paper size detection and cassette presence detection Paper size detection 19Paper size detection Paper feeder cassette lift operation 50Paper-feeder cassette lift Theory of operation Enww Paper feeder presence detection Paper-feeder multiple feed prevention 51Paper-feeder multiple feed prevention Paper feeder jam detection Removal and replacement Removal and replacement strategy Introduction Electrostatic discharge Required tools After performing service Service approachBefore performing service Post service test Parts removal order SSD 3Parts removal order 2 Customer self repair CSR components Print cartridges 5Remove the print cartridge 2 7Remove the duplex reverse guide 2 Removal and replacement Duplex reverse guide Toner collection unit 9Remove the toner collection unit 2 10Remove the toner collection unit 3 Formatter PCA ESD sensitive component Before proceeding, remove the following components Disk drivesRemove the HDD 14Remove the HDD 2 Remove the SSM Install a replacement hard drive Reload the firmware Tray cassette Fuser Pickup roller Tray Pickup roller Tray 26Remove the pickup roller Tray 2 4 Removal and replacement Pickup and feed rollers Tray 27Remove the Pickup and feed rollers Tray 3 1 Enww Separation roller Tray Secondary transfer roller Reinstall the transfer roller 33Reinstall the transfer roller Secondary transfer assembly Reinstall the secondary transfer assembly 37Reinstall the secondary transfer assembly Intermediate transfer belt ITB Enww Right door optional paper feeder 43Remove the right door optional paper feeder 3 Covers Identification and location Front door assembly Cover on 46Remove the front door assembly 2 Removal and replacement Right door assembly 48Remove the right door assembly 2 50Remove the right door assembly 4 Removal and replacement 52Remove the right door assembly 6 54Remove the right door assembly 8 Removal and replacement Right rear cover Enww Left cover Remove the left cover 61Remove the left cover 4 Removal and replacement Left bottom cover Remove the left bottom cover Left bottom handle Remove the left bottom handle Hardware integration pocket HIP dn and xh models only Control panel assembly Enww Right front cover Remove the right front cover Enww 74Remove the right front cover 5 Removal and replacement Reinstall the power button 75Reinstall the power button Front top cover Remove the front top cover Enww Rear cover and upper rear cover Remove the rear cover and upper rear cover 80Remove the rear cover and upper rear cover 3 Enww Rear top cover Remove the rear top cover 83Remove the rear top cover 2 Removal and replacement Right bottom handle Remove the right bottom handle Rear bottom handle Remove the rear bottom handle Internal assemblies Delivery fan, cartridge fan, and environmental sensor Disconnect five connectors callout Enww Enww Release one tab callout Toner collection sensor Remove the toner collection sensor 97Remove the toner collection sensor 3 Residual toner feed motor Remove the residual toner feed motor 101Remove the residual toner feed motor 3 Enww 105Remove the residual toner feed motor 7 Reinstall the residual toner collection door Registration density RD sensor assembly Remove the RD sensor assembly 109Remove the RD sensor assembly 3 Removal and replacement 111Remove the RD sensor assembly 5 112Remove the RD sensor assembly 6 Removal and replacement Power supply fan and fan duct Remove the power supply fan and fan duct 115Remove the power supply fan 3 Removal and replacement 116Remove the power supply fan 4 Registration assembly Remove the registration assembly 119Remove the registration assembly 3 Remove three screws callout 123Remove the registration assembly 7 Enww Lower pickup guide Remove the lower pickup guide Enww Reinstall the lower pickup guide Interconnect board ICB Remove the ICB Enww ESD sensitive part DC controller PCA and trayRemove the DC controller PCA Enww Enww Remove the low voltage power supply 132Remove the low voltage power supply 1 Enww Remove two screws callout Remove the assembly High voltage power supply lower HVPS-D Remove the high voltage power supply lower Enww 142Remove the high voltage power supply lower 4 Reinstall the high voltage power supply lower Developing disengagement motor Remove the developing disengagement motor 145Remove the developing disengagement motor 2 Pickup motor Remove the pickup motor Lifter drive assembly Remove the lifter drive assembly Enww Automatic close assembly Remove the automatic close assembly Cassette pickup drive assembly Remove the cassette pickup drive assembly 152Remove the cassette pickup drive assembly 3 Enww 156Remove the cassette pickup drive assembly 7 Enww 159Remove the cassette pickup drive assembly 10 Reinstall the cassette pickup drive assembly Make sure that the spring callout 1 is correctly installed Cassette pickup assembly Remove the cassette pickup assembly 165Remove the cassette pickup assembly 3 Laser/scanner assembly Y/M Remove the laser/scanner assembly Y/M Enww Enww 172Remove the laser/scanner assembly Y/M 7 Enww 176Remove the laser/scanner assembly Y/M 11 Enww Laser/scanner assembly C/Bk Remove the laser/scanner assembly C/Bk Enww Enww 183Remove the laser/scanner assembly C/Bk 6 184Remove the laser/scanner assembly C/Bk 7 Reinstall the protective glass cleaner PGC actuators 187Reinstall the PGC actuators 3 189Reinstall the PGC actuators 5 Removal and replacement High voltage power supply upper HVPS-T Remove the high voltage power supply upper 193Remove the high voltage power supply upper 4 Enww Reinstall the high voltage power supply upper 195Reinstall the high voltage power supply upper Drum motor Remove the drum motor Drum motor 2 or drum motor Remove the drum motor 2 or drum motor 197Remove the drum motor 2 or drum motor Fuser motor Remove the fuser motor 198Remove the fuser motor Main drive assembly Remove the main drive assembly Enww 204Remove the main drive assembly 6 205Remove the main drive assembly 7 Removal and replacement Reinstall the main drive assembly 206Reinstall the main drive assembly 1 Slowly rotate the shaft near the black cam 210Reinstall the main drive assembly 5 Enww 214Reinstall the main drive assembly 9 Enww Fuser drive assembly Remove the fuser drive assembly Enww 222Remove the fuser drive assembly 6 Removal and replacement Reinstall the fuser drive assembly 223Reinstall the fuser drive assembly Delivery assembly Remove the delivery assembly 225Remove the delivery assembly 2 227Remove the delivery assembly 4 Removal and replacement 228Remove the delivery assembly 5 Reinstall the delivery assembly Duplex drive assembly Remove the duplex drive assembly Optional paper feeder assembly Tray Drawer connector Remove one connector callout Solve problems Solve problems checklist Solve problems checklist Menu map Print the menu maps Current settings pages Print the current settings pages Cold reset using the Preboot menu Preboot menu optionsAccess the Preboot menu Troubleshooting flowchart Troubleshooting processDetermine the problem source 1Troubleshooting flowchart Power-on troubleshooting overview Power subsystemPower-on checks Enww LED diagnostics Tools for troubleshootingIndividual component diagnostics Understand lights on the formatter 2Heartbeat LED, product initialization Formatter to control panel communication interruptionsHeartbeat LED, product initialization Preboot menu 49.XX.YY error or Connectivity LED, product operating 3Heartbeat LED, product operational Connectivity LED Connectivity LED, product initialization 4Connectivity LED, product initialization If the error persists, perform a firmware upgrade HP Jetdirect LEDs 5Connectivity LED, product operational Engine diagnostics Defeating interlocks 2Diagnostic test 2 Disable cartridge check Administration Troubleshooting Diagnostic Tests Engine test button 4Engine-test button Paper path test Paper path sensors test 6Paper-path sensors diagnostic tests Sensor name Sensor number Manual sensor test 7Manual sensor diagnostic testsSensor or switch name Sensor or switch number Registration sensor Fuser loop sensors Open the right door Lower the secondary transfer assembly Fuser output sensor Duplexer refeed sensor Output-bin full sensor Fuser pressure-release sensor ITB alienation sensor Enww Right- and front-door interlock switches Enww 8Manual sensor test 2 diagnostic tests Tray/bin manual sensor test Tray 1 paper sensor Tray 2 paper sensor Tray 2 cassette sensor Tray 2 cassette lifter sensor Tray 3 empty sensor Tray 3 media feed sensor Tray 3 stack surface sensor Print/stop test Tray 3 media size sensors 9Component test details Component testsComponent test special-mode test ITB Contact/Alienation Fuser Pressure Release MotorAlienation Motor TCU Motor Diagrams Block diagrams 10Sensors Location of connectors DC controller PCA Paper feeder driver PCA 30Paper feeder driver PCA Base product Plug/jack locationsLocations of major components 32Component locations 2 33Component locations 3 Solve problems 34Component locations 4 2219 PCAs, motors, fans, switches, solenoids, and clutches Location Connector Component Component name Abbreviation 13PCAs, motors, fans, switches, solenoids, and clutches Location Connector Component abbreviation Component name 500 paper feeder General timing chart Timing chart Circuit diagrams Inter 40 Paper feeder circuit diagram Print quality troubleshooting pages Internal print-quality test pages Yellow Green 44Black print-quality troubleshooting Print quality assessment Enww Set up an auto cleaning CleaningProcess a cleaning Configuration Configuration 45Configuration Security Settings information HP embedded Jetdirect Accessories and internal storage Finding important information on the configuration pages14Important information on the configuration pages Diagnostics menu Color band test Print quality troubleshooting tools Repetitive defects ruler Calibrate the product 15Sign In menu Control panel menusSign In menu Retrieve Job From USB menu CancelRetrieve Job From USB menu Select a File or Folder All Jobs With PIN Menu options include Retrieve Job From Device Memory menuRetrieve Job From Device Memory menu 17Retrieve Job From Device Memory menu Copies Delete Select Copies fieldDelete is Delete Enter Pin to Delete Delete All Job withoutPrint Copies Jobs Supplies menu 18Supplies menu Low Threshold SettingsColor Cartridges Very Low Stop Settings Prompt to Continue Yellow Cartridge Settings Magenta Low Threshold CartridgeLow Threshold Cyan Cartridge Settings Specify Settings Prompt to Color/Black Mix Mostly Black Mostly Color Pages Color Pages if Level Gauge Reset Supplies New Fuser Kit YesOff Messages menu to Enww Manage Trays Use Requested Tray Exclusively First Trays menuFirst level Second level Values 19Trays menu Mode Enabled DisabledAlternative Letterhead Disabled Image Rotation Standard Alternate Tray 2 Size Tray 1 SizeTray 1 Type Tray 2 Type 20Reports menu Administration menuReports menu Guide for matching printed colors General Settings menu General Settings menu First level Second level Third level Fourth level Values 21General Settings menuWake/Auto On All Events Network port Power button Only After Enww Midtones are the middle-range color- values in an image Restore Color Registration X1 Shift Mm to Y1 Shift X2 Shift Default = Y2 Shift Transparency Adjust PaperPrint Mode Sensing Down Humidity Mode Normal HighPre-Rotation Off Mode Paper Curl Mode Normal Reduced Standard. Smooth settingSmooth Heavy Paper Standard Background Normal Alternate Low VoltageTray Normal Alternate Alternate 3 setting Alternate 1 settingAlternate 2 setting Alternate 2 settings Fuser Temp Normal Alternate Enww Jam Recovery Auto Off Manage Stored Quick Copy Job Held Timeout HourDefault Folder Manage Stored Enww Retrieve From USB Settings menu Retrieve From USB Settings menuGeneral Print Settings menu General Print Settings menu 23General Print Settings menu Font Point Size Range 4.00 Default = Setting is 0.44 to 99.99.Factory default setting is Symbol Set Default Print Options menu 24Default Print Options menu Enww Jobs. If Book-style Edge to Edge Enabled DisabledFlip-style Display Settings menu Display Settings menu 26Manage Supplies menu 25Display Settings menuManage Supplies menu Stop The product stops until you replace the print cartridge Enww Different percentage for each color Low. Continuing to Unit Settings Prompt toCause an error Print without Settings Color/Black Mix Auto Supply Messages Low Message Off Reset Supplies New Fuser KitPages Black Pages if Manage Trays menu 27Manage Trays menu Blank Pages Auto Yes Override A4/Letter First level Values Description Use Another Tray EnabledAlternative Letterhead Mode Disabled Jetdirect Menu Network Settings menu28Network Settings menu 29Jetdirect Menu IPv4 Settings Config Bootp MethodManual Settings menu to configure TCP/ IPv4 parameters Auto IP Enww Xxx.xxx.xx.x Dhcp Renew YesPrimary DNS Secondary Enww Router Router Policy SpecifiedUnavailable Unavailable If Idle Timeout Proxy Port Security Required Disable IPSec802.1x Reset Optional Reset Security Yes Diagnostics Embedded LAN HW Test Yes Tests TCP/IP Data Path Test Yes Http Test YesSnmp Test Yes Execute Yes ExecutionTime 127.0.0.1 Dest IPv6 IPv6Dest IPv4 Packet Size Packets Print Results Yes ExecutePing Results Packets Sent Received RTT Average RTT MinRTT Max Enww 10T Half 100TX Half or10T Half is set 10T Full Exit Troubleshooting Print Event Log Troubleshooting menu30Troubleshooting menu Print Paper Path Print Quality Print PQ Pages TroubleshootingPrint Diagnostic Select Print Test Sensors CheckPaper Path Start Test Paper Path Test Print Test Test Number of Copies Range 1 Default =Manual Sensor Manual Tray/Bin Repeat Off Print/Stop Test Calibrate/Cleaning menu Device Maintenance menuBackup/Restore menu 31Backup/Restore menu Product automatically Delay Calibration at Yes Wake/Power On First level Second level Values Description Full Calibration USB Firmware Upgrade menu Label missing 10.0X.Y0 Supply memory errorMemory error 10.22.52 10.22.5010.22.51 10.23.50 10.23.60 10.23.5110.23.52 Printing past very low 10.XX.40 Genuine HP supplies installed 10.XX.34 Used supply in use 10.XX.41 Unsupported supply in use 10.XX.70 Printing past very low 10.YY.15 Install supply 10.YY.25 Wrong cartridge in color slot 10.YY.35 Incompatible supply 13.A3.D3 YY Internal clock error13.00.00 13.A3.FF 13.B2.A3 13.B2.A113.B2.A2 13.B2.D1 13.WX.FF 13.D3.DZ13.WX.EE 13.WX.YZ Fuser area jam 13.WX.YZ Fuser wrap jam 13.WX.YZ Jam below control panel 13.WX.YZ Jam in middle right door 13.WX.YZ Jam in right door 13.WX.YZ Jam in Tray Insufficient memory To continue, press OK Too complex 32.08.XX 32.1C.XX Enww Recommended action Enww 32.21.00 33.XX.YY Used board/disk Error33.XX.YY YZ Unexpected size in tray YZ Unexpected type in tray LBP OHT YZ Error To continue, press OK Enww 47.01.XX 42.XX.YY47.00.XX 47.02.XX 47.04.XX 47.WX.YZ Printer calibration error To continue, press OK47.03.XX 47.05.00 47.FC.23 49.XX.YY To continue, turn off then on 50.WX.YZ Fuser error To continue, turn off then on Enww Enww YY Error XX To continue, turn off then on 54.XX.YY Error Recommended action 54.00.03 54.0X.0D or 54.0X.0E YY Error To continue, turn off then on YY DC controller error To continue, turn off then on55.0X.YY DC controller error To continue, turn off then on 57.00.0Y Error To continue, turn off then on 58.00.04 59.05.XX Recommended action 59.00.04 or 60.00.0Y Tray Y lifting error 59.05.08 or No system To continue, turn off then on Error To continue, turn off then on61.00.01 81.0X.YY Embedded JetDirect error Corrupt data in firmware volume Corrupt data in job data volume Corrupt data in solutions volumeCorrupt data in configuration volume Upgrade not performed file is corrupt Upgrade not performed timeout during receive Upgrade not performed error writing to disk Upgrade not performed error reading upgrade Upgrade canceled by user Upgrade not performed the file is invalid 99.00.2X Incorrect disk Unsupported diskUnknown disk Disk malfunction Disk is not bootable please download firmware Disk data errorNo disk data installed 99.XX.YY Supply low or Supplies low Binname Full Remove all paper from binSupply almost full Supply very low or Supplies very low File System file operation failed To clear, press OK Tray X liftingFile System device failure To clear, press OK File System file system is full To clear, press OK Accept bad signature File System is not initializedFile System is write protected Bad optional tray connection Canceling... jobname Calibration reset pendingCanceling Checking engine Clearing event log Cleaning do not grab paperChosen personality not available To continue, press OK Clearing paper path Close lower right door Creating cleaningClose front door Close upper right door EIO X disk initializing HP Secure Hard Drive disabledData received To print last page, press OK Event log is empty Incompatible supply Incompatible supplies Install Fuser Unit Install supplyInstall supply Close rear door Internal disk not functional Install suppliesInstall Transfer Unit Load Tray X Type, Size To use another tray, press OK Internal disk spinning upLoad Tray X Type, Size Moving solenoid Manually feed Type, SizeManually feed Type, Size To use another tray, press OK Paused No job to cancelMoving solenoid and motor Performing Color Band Test Please wait Printing ConfigurationPrinting Diagnostics Printing Cmyk samples Printing File Directory Printing Engine TestPrinting Event Log Printing Font List Printing Menu Map Printing PQ TroubleshootingPrinting Help Printing Registration Processing duplex job Do not grab paper until job completes Printing Supplies StatusPrinting Usage Processing Ready IP Address Processing... copy X of YReady Remove all print cartridges Remove shipping lock from Tray Replace supply Replace Supplies Rotating color motor Restore Factory SettingsRestricted from printing in color Rotating motor Supplies in wrong positions Sleep mode onSize mismatch in Tray Tray X empty Type, Size Tray X open Tray X overfilled TroubleshootingUnsupported drive installed To continue, press OK Type mismatch Tray Unsupported tray configuration Unsupported USB accessory detected Remove USB accessory USB accessory not functional Wrong cartridge in color slot Event log messages 48Sample event log Print an event log Print the event log from the Administration menuPrint the event log from the Service menu View an event log View an event log from the Administration menuViewing the event log from the Service menu Clear an event log Common causes of jams Product is jammed Cause SolutionClear jams Jam locations 49Jam locations Clear jams in Tray Enww Clear jams in the output bin area Clear jams in Tray Clear jams in the right door Enww Enww Enww Enww Clear jams in the lower right door Tray 34Causes and solutions for fuser delivery delay jams Jam causes and solutions33Causes and solutions for delivery delay jam Jams in the output bin 37Causes and solutions for residual media jams 35Causes and solutions for wrapping jams36Causes and solutions for fuser delivery stationary jams 38Causes and solutions for pickup delay jams PCA 39Causes and solutions for pickup stationary jams Jams in the duplex area duplex models 40Causes and solutions for duplexing reverse jams41Causes and solutions for duplex repick jams Jams in Tray 1, Tray 2 and internal paper path 42Causes and solutions for residual media jams43Causes and solutions for pickup delay jam 1 tray pickup 44Causes and solutions for pickup stationary jams 45Causes and solutions for pickup delay jam 1 MP tray pickup Jams in Tray Change jam recovery Paper does not feed automatically Cause Solution Solve paper handling problemsProduct feeds multiple sheets Cause Solution Product feeds multiple sheets Or, change the Manually Feed Prompt setting to Unless Use manual print modes Select a manual print mode47Print modes under the Adjust Paper Types sub menu 48MP modes under the Optimize submenu Uniformity Control TrayBackground Fuser Temp Image defects table Solve image quality problemsProblem Sample Cause Solution Image defects table 49Image defects table Clean the window and remove any Replace the high-voltage power Dirty, replace the ITB Execute a Pressure roller clean Set up an auto cleaning Clean the productClean the paper path Problem Cause Solution Solve performance problems50Solve performance problems Solve network problems Solve connectivity problemsSolve direct connect problems Enww Service mode functions Service menu Cleaning Service IDCold Reset Paper Clear Event Log Restore factory-set defaults values Product resetsRestore factory-set defaults Active and repository firmware locations Clean Disk and Partial Clean functionsProduct cold reset Reasons for performing Partial Clean Partial CleanCharacteristics of a Partial Clean Execute a Partial Clean Execute a Clean Disk Clean DiskReasons for performing Clean Disk Enww 51Preboot menu options 1 Sign Password Clear Clean DiskPartial Clean Password 52Preboot menu options 2 External 53Preboot menu options 3Device 54Preboot menu options 4 55Preboot menu options 5 Reset Password 56Preboot menu options 5Service Tools Jetdirect Off Perform a firmware upgrade Product updatesDetermine the installed revision of firmware Embedded Web Server USB storage device Preboot menu USB storage device control-panel menu Enww Parts and diagrams Order parts, accessories, and supplies Print cartridges and toner collection unit AccessoriesPart numbers Memory Customer self repair CSR and service kits Simplex Common fasteners How to use the parts lists and diagramsScrews How to use the parts lists and diagrams Simplex model Duplex model See Right-door assembly External covers, panels, and doors Description Part number Qty Right-door assembly Right-door assembly Internal assemblies 1 3Internal assemblies 1 4Internal assemblies 1 Internal assemblies 2 4Internal assemblies 2 5Internal assemblies 2 Internal assemblies 3 501 25 26 6Internal assemblies 3 Internal assemblies 4 6Internal assemblies 4 7Internal assemblies 4 Internal assemblies 5 7Internal assemblies 5 8Internal assemblies 5 Cassette Cassette Description Part number Qty Cassette RM1-8125-000CN Paper pickup assembly 9Paper pickup assembly Paper pickup assembly PCAs 10 PCAs PCAs Assessories 500-sheet paper feeder 500-sheet paper feeder 12Paper feeder covers Parts and diagrams Paper feeder covers Paper feeder covers 13Paper feeder main body Parts and diagrams Paper feeder main body Paper feeder main body Paper feeder cassette 14 Cassette Cassette 15Paper feeder PCA Parts and diagrams Paper feeder PCA RM1-5839-000CN Paper feeder PCAPart number Qty Description Part number Alphabetical parts list17Alphabetical parts list PCAs on Duplexing unit cable assembly RM1-5730-000CN Paper pickup assembly Paper feeder PCA Spring, compression RU6-2316-000CN Part number Description Numerical parts list18Numerical parts list RC2-5426-000CN Cover, front right Part number Description RM1-5696-000CN Waste toner detect assembly RM1-6198-000CN Cassette assembly Tray RM1-8167-000CN Right-door assembly simplex Enww Service and support Hewlett-Packard limited warranty statement Hewlett-Packard limited warranty statement Enww Enww Data stored on the print cartridge End User License Agreement Transfer Hewlett-Packard Development Company, L.P Rev /09 OpenSSL Customer self-repair warranty service Customer support Product specifications Product Height Depth Width Weight Physical specificationsTable B-1Product dimensions Product Height Depth Width Regulatory information FCC regulations Environmental product stewardship program Multiple returns more than one cartridge Return and recycling instructionsUnited States and Puerto Rico Single returns Non-U.S. returns PaperMaterial restrictions Residents of Alaska and Hawaii Enww Supplementary Information Declaration of conformityEnergy Use For Regulatory Topics only, contact Boise, Idaho USASeptember Volatile memory Certificate of volatilityTypes of memory Non-volatile memory Vcci statement Japan Power cord instructions Safety statementsLaser safety Power cord statement Japan EMC statement Korea Laser statement for Finland Luokan 1 laserlaite GS statement Germany Restriction on Hazardous Substances statement Ukraine Index Cables See also tests troubleshooting diagrams See also jams fans Pages PCL Registration density RD sensor See also cassette Power 244 Page CF079-90942* *CF079-90942