Table 3-32Calibrate/Cleaning menu (continued)

First level

Second level

Values

Description

 

 

 

 

Full Calibration

 

 

The product automatically

 

 

 

calibrates itself at various times.

 

 

 

However, you can calibrate the

 

 

 

product immediately if you see

 

 

 

problems with print quality. Use

 

 

 

this feature to perform a full

 

 

 

calibration, which can take up to

 

 

 

three minutes. Use this

 

 

 

calibration if the color layers

 

 

 

seem to be shifted on the page.

 

 

 

Before calibrating the product,

 

 

 

make sure that Ready appears

 

 

 

on the control-panel display. If a

 

 

 

job is in progress, the calibration

 

 

 

occurs when that job is complete.

Delay Calibration at

Yes*

Wake/Power On

No

 

This menu controls the timing of Power-on calibration when the product wakes up or is turned on.

Select this menu item if you are not using the Wake Time feature and want to print jobs immediately when the product wakes up or is turned on, before calibration begins.

●Select No to have the product calibrate immediately when it wakes up or is turned on. The product will not print any jobs until it finishes calibrating.

●Select Yes to enable a product that is asleep to accept print jobs before it calibrates. It may start calibrating before it has printed all the jobs it has received. This option allows quicker printing when coming out of sleep mode or when you turn the product on, but print quality might be reduced.

NOTE: For the best results, allow the product to calibrate before printing. Print jobs performed before calibration may not be of the highest quality.

390 Chapter 3 Solve problems

ENWW