HP Enterprise 500 manual Print Results Yes Execute, Ping Results Packets Sent, Received

Table 3-29	Jetdirect Menu (continued)
First level	Second level	Third level	Fourth level	Fifth level	Values	Description
		Count			Default = 004	Specify the
						number of ping
						test packets to
						send for this test.
						Select a value
						from 0 to 100.
						The default is 4.
						To configure the
						test to run
						continuously,
						select 0.
		Print Results			Yes
					No*
		Execute			Yes	No: Do not
					No*	initiate the
						selected tests.
						Yes: Initiate the
						selected tests.
	Ping Results	Packets Sent			Default = 00000	Packets Sent
						Shows the number
						of packets (0 -
						65535) sent to
						the remote host
						since the most
						recent test was
						initiated or
						completed. The
						default is 0.
		Packets			Default = 00000	Packets
		Received				Received

Shows the number of packets (0 - 65535) received from the remote host since the most recent test was initiated or completed. The default is 0.

378 Chapter 3 Solve problems ENWW